12 Volt 20 GPM Fuel Transfer Pump with Nozzle Kit for Transfer of Gasoline, Diesel, Kerosene, Ethanol & Methanol Blends & Biodiesel Blue (Fuse Required More than 50Amp)

Features

• [Fuel Transfer Pump Application] For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils.
• [Note]：①. The product has a protective device, and customers do not need to install fuses additionally. ②. If additional installation is required, the fuse must not be lower than 50amp, otherwise it will burn out the circuit of this product.
• [Premium Quality] This Fuel Transfer Pump body is made of cast iron, which is sturdy and durable. The pump body adopts a waterproof design, and the pump has a built-in filter and a bypass valve. The ball bearing structure does not require lubrication.
• [High Security] Our gasoline pump equipped for padlocking, your pump nozzle can be padlocked to the pump for added security. Features Thermal Protection and Bypass Value to Prevent Overloading.
• [Attention] 1. Please make sure the wired motor is fully charged before use for better work (if the power is too low, the product may not be able to reach the normal working efficiency) ; 2. If your pump stops working during use, this may be due to the motor overheating and triggering the protection mechanism, please make sure that the wired motor is fully charged, and then try to restart it after 15 minutes of cooling.
• [High Performance] Offering a secure copper-forged pump head for both DC 12V or 24V, ensuring enhanced safety. Designed for 12V battery powered bung mounted transferring from fuel tanks on trailers or trucks, this fuel pump will pull fuel at tank depths of 9.8 ft. and discharge fuel up to heights of 26 ft.