2.4G Bluetooth Remote Control Remote Controller Transmitter Accessories for Kids Ride on Children Electric Ride On Toy Car, Kids Bumper Car Remote Control Replacement Parts

Kids bumper car bluetooth remote control remote make sure the purchased part has same appearance as the original one! The remote control is not universal. Ⅰ. Normal use 1. Bluetooth remote control with slow start function 2. Remote control or manual press the emergency stop button, the vehicle stops moving 3. Remote control does not use 15 seconds after the automatic cut off the battery power consumption. Ⅱ. The first use (or replace the battery) need to matching frequency Step 1. Install two AAA 1.5V batteries, (note the positive and negative polarity inside the battery chamber), and finally close the battery cover, indicator will flash three times indicates that the battery is installed correctly. Step 2. Long press on the frequency key 2-4 seconds,Low speed LED lights will flash Step 3. Turn on the power of the car,Low speed LED lights will from flash to long lighting,then frequency bind succeed Step 4. If the frequency bind failed (Low speed LED lights flash),remove the battery and repeat stept1-3 Step 5.remote conrtol without operation after 10 seconds,indication light will off into power saving mode Ⅲ. Warnings 1.Old or different types of batteries can not be mixed 2. Install the battery according to the positive and negative markings in the battery compartment 3.When the remote control is not used for a long time, please remove the battery.