ANYCUBIC Wash and Cure Station 3.0, Resin 3D Printer Post-Process for Most LCD/SLA/MSLA/DLP Resin Printer, Detergent Saving&Dual Cleaning and Curing Models

Features

• 【Upgraded Cleaning and Curing Volume】 Anycubic Wash& Cure 3 has an impressive 42% increase than the wash & cure 2.0 in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for resin 3D printers with a size of 7.3 inches or less.
• 【Optimized Details Curing】 Flexicure Gooseneck design increases the energy value by 30,000uW/cm² in the 1-3 cm irradiation range and improves the curing effect on top of the model and other small parts.
• 【Dual-layer Design】Wash& Cure 3.0 double-layered PP material cleaning basket supports simultaneous cleaning of platforms and is designed to save detergent with two adjustable heights of 100 mm and 165 mm to flexibly accommodate printing platforms from 5.9’’ to 7.3’’.
• 【Powerful Curing Light】By adopting a brand-new arrangement of light beads and lens light source, Anycubic Wash & Cure 3.0's curing uniformity has been enhanced by 20%* compared to its predecessor 2.0. The powerful light source for more efficient full curing of models
• 【Easy to Use】 Cleaning and Curing Dual Mode and Enhanced Gooseneck Lamp Cure Mode are individually keyed and can be easily switched on and off at the touch of a button. Cure time can be adjusted from 1 to 30 minutes with the rotary knob control. Wash and cure 3 produces less noise during operation, providing a quiet working environment.