Bstinay AC110-220V Door Window Reed Switch Black Normally Open Magnetic Door Contacts Switch

Features

• Note:The switch is a load switch. It cannot be measured by a multimeter and cannot be used as a semaphore switch. It is used to control lighting control switches for hotel entrance doors, wardrobe cabinets, etc. Do not connect to alarms, household appliances, etc
• Working Principle: When the wardrobe door is opened, the light is on, and when the wardrobe door is closed, the light is off. (1). The shell and wire colors are divided into black and white. If other colors are required, they can be customized according to requirements
• Installation Method: Concealed installation, open a hole with a diameter of 10MM on the door, and insert it directly. The magnet axis and the switch axis must be on the same line
• For different types of lamps directly connected to 85~240V power supply, the specific load requirements of the switch are as follows: ① Incandescent lamp (tungsten filament lamp): 50W Max ② Energy saving lamp (T4, T5) : 38W Max (λ<0.80) ③ Radiation Lamp: 30W Max (λ<0.80) 4. When the power factor of the lamp is λ>0.80, a filter i.nductor (optional accessory) should be connected to the wiring loop.
• For different types of LED lights driven by DC, the specific load of the switch is as follows: ① 12VDC 30W ② 24VDC 50W
• Wardrobe Switch: a strong electric door magnetic switch specially developed for the control of wardrobe lights