???? ???????? DC97-07618A Dryer Drum Felt Seal by puxyblue - Replaces SamSung dryer drum felt seal 3998155 AP4453798 PS4218879 EAP4218879 - Compatible with DV48H7400EW DV45K6500EV

Features

• 【𝗡𝗜𝗖𝗘 𝗠𝗔𝗧𝗘𝗥𝗜𝗔𝗟】:Dryer Drum seal DC97-07618A seals the drum to prevent air from escaping.DC97-07618A Gasket felt seal good quality, made of high-quality glass fiber The double-layer felt construction is finely stitched tightly, high temperature resistant material, with good stretchability, and added felt leather protection, with the characteristics of waterproof and tear-proof. DOUBLE-LAYER felt construction is finely stitched tightly, making it more stable as the drum picks up and sheds clothes, allowing for faster drying rates and faster forwarding of the clothes. At the same time, it has better sealing effect and brings better thermal effect to the dryer
• 【𝗣𝗔𝗖𝗞𝗔𝗚𝗘 𝗜𝗡𝗖𝗟𝗨𝗗𝗘𝗦】:samsung dryer drum felt seal kit Include:1 x 38-IN dc97-07618a dryer felt seal,1 x high temperature adhesive.If your washing machine is meeting the problems of Leaking | Not stirring properly | Noisy | Will Not Start | Will not tumble | Takes too long to dry. etc, Over time, the drum seals will wear out and then tear, which will cause stains to start to appear on the dried clothes, which can be very bad, and it is recommended that you replace them in a timely manner.Replaced with this Puxyblue’s dc97-07618a samsung dryer drum seal and dryer runs smoothly now
• 【𝟭𝟬 𝗬𝗘𝗔𝗥𝗦 𝗘𝗫𝗖𝗛𝗔𝗡𝗚𝗘】:dc97-07618a dryer felt seal kit SUPPORTS 10 YEARS EXCHANGE. ►Unfold the strip (its kind of V-shaped in cross section) and stretch it around your drum rim. You need it all the way on the rim FIRST. Then slide the leg over the corner, leaving the vinyl covered strip on the drum. Do this a section at a time and clamp it. Once you've got it all positioned, move one clamp, lift up the vinyl covered part and squirt glue under it. Work your way around, moving one clamp at a time. After you've glued it to your satisfaction, make sure its even and squeezed down, then leave it overnight to dry before you put things back together.
• 【𝗙𝗢𝗥 𝗦𝗔𝗠𝗦𝗨𝗡𝗚 𝗗𝗥𝗨𝗠 𝗙𝗘𝗟𝗧 𝗚𝗔𝗦𝗞𝗘𝗧】:Upgraded DC97-07618A Dryer Drum Felt Seal kit is suitable for Samsung Dryers in the DV, DVG, DVE, MD and Y series.►Replaces for 3998155 AP4453798 PS4218879 EAP4218879 and Suitable for models:dv231aewxaa0001,dve50m7450p/a3-00,dv40j3000ew/a2-00, dv448aep/xaa-02, dv448aep/xaa-03, dv330aew/xaa, dv330aeb/xaa-00, dv330aeb/xaa-02, dv330aeb/xaa-03,dv5471aew/xaa-00,dv5471aew/xaa-02,dv50f9a7gvp/a2-00,dv45h7000ep/a3-00,etc,( 𝐏𝐥𝐞𝐚𝐬𝐞 𝐬𝐞𝐞 𝐛𝐞𝐥𝐨𝐰 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐥𝐢𝐬𝐭 𝐨𝐟 𝐜𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 𝐦𝐨𝐝𝐞𝐥𝐬. If you're unsure about the compatibility, send us your model number and we can help you confirm if it fits or not.)
• 【𝗗𝗥𝗬 𝗧𝗜𝗠𝗘𝗦 𝗔𝗥𝗘 𝗠𝗨𝗖𝗛 𝗦𝗛𝗢𝗥𝗧𝗘𝗥 𝗡𝗢𝗪】:Felt seal is sturdy and glue holds very well,Works just as good as a name brand. You will need some clothes pins or something of the sort to help hold it as you put it on, also removing the whole drum helps with a smooth surface installation. I do recommend having a second person help you hold it when you are almost all the way around the drum with the seal as the end needs to be stretched over to fit.⚠️My only caution is that don't be alarmed by the initial smell of the glue and new gasket, it does dissipate over a few loads.