DONGKER Battery Spot Welder,12V 1500A Portable Spot Welding Machine Spot Welder Control Board Built-in Temperature Monitor

Features: 1500A Welding Current Supply 0.1-0.3mm Nickel Strip 1.8inch LCD Display Screen Built-in Temperature Monitor English/Chinese Switchable Display Double Pulse Spot Welding Technology Parameters: Work Voltage:DC 5.4V-15V(Recommended 12V) from Battery Welding Current: 1500A Peak Current:5*1200A Power Line: 8AWG*20cm Welding Pen Wire: 8AWG*45cm Work Temperature:-20℃~85℃ Work Humidity:10%~85%RH Size:88*63*22mm Use steps: Select ‘Manual’ work mode after enter into Set Interface by touch ‘SET’ on LCD. Connect Welding Pen Wire. When spot welding starts, press the spot welding pen to flip the spot welding switch. Note: It can only provide working power to ZK-XW1 through 5.4V-15V Battery. Prohibit Connect Power Supply: Switching power supply, DC stabilized power supply, Adapter, Transformer. Due to the relatively thin tip of the soldering pen, a large amount of heat is generated during welding and conducted to the soldering pen. After continuous and rapid operation, the soldering pen will heat up or become hot, which is a normal phenomenon. Application: Battery pack assembly Battery connection DIY portable power bank Battery repair and maintenance Package: 1 x ZK-XW1 Intelligent LCD Battery Spot Welder Controller 2 x 20cm 8AWG Power Line 1 x 100cm Nickel Strip 2 x Acrylic Board 8 x M2 Copper Pillar 4 x M2 Screw 2 x M3 Screw 2 x M3 Nut 1 x ‘ + ’ Screwdriver 1 x Mini Wrench 2 x 45cm 8AWG Welding Pen Wire(Optional Purchase)