ECCPP 2PCS 1.25" inch 5x4.75 to 5x4.75 Wheel Spacers Hubcentric 5 Lug 70.5mm for 1982-2003 for Chevy Camaro 1984-2013 for Chevy Corvette Wheel Spacers

Features

• Installation with Confidence : 5 lug hubcentric Wheel Spacers with Thickenss:1.25" or 32mm;Inner Diameter:70.5mm;Vehicle Bolt Pattern:5x4.75 or 5x120.65mm;Wheel Bolt Pattern:5x4.75 or 5x120.65mm;Thread Pinch:12x1.5;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• Superior Safety And Stability : Hubcentric wheel spacers 5x4.75 1.25 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• Strict Quality Performance : The 5x120.65mm wheel spacers HUBCENTRIC are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
• Compatibility List Included : for 1979-1985 for Cadillac Eldorado || 2004-2009 for Cadillac XLR1987-1999 for chevrolet Blazer || 2001-2005 for Chevrolet Blazer 1984-2019 for Chevrolet Corvette
• Check before You Purchasing : 5x4.75 wheel spacers Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm