HICTOP 250 * 250mm Textured PEI Bed PEI Sheet Platform with 3d Flex Bed Magnetic build plate PEI for 3D printers

Features

• 1 The AnkerMake M5 pei bed is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
• 2 The HICTOP 250x250 pei is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.
• 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
• 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
• 5 The size of HICTOP pei sheet is 250*250mm（9.84*9.84inch）, it is applicable with 3D printers with 250*250mm heated beds, please measure the hot bed before placing the order.