HQPARRTS 15mm to 12mm Fork Thru Axle Conversion Kit Compatible with Most Road, Gravel, and Cross Bikes

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【Compatible With】:15mm to 12mm Fork Thru Axle Conversion Kit for most road, gravel and cross bikes.
• 【Product Description】:Use 12mm wheels in a 15mm fork. Converts 15x100 forks to 12x100 standard by using two inserts to reduce the diameter of your fork's dropouts.Converts fork from 15mm to 12mm Thru Axle allowing use of a wide range of hubs and wheels previously incompatible.
• 【Package Included】: Thread adapter: M15x1.5mm pitch external thread, 15mm long.M12x1.5mm internal thread Thru Hole Insert: 15mm OD x 12mm ID, 10mm long.Axle: 12mm x 130mm long, M12x1.5mm threads.2mm spacer (optional, for fine tuning length),1pcs Washers
• 【Installation】:1. Use either grease or low-strength threadlocker on thread adapter 2. Tighten the threaded adapter into the fork using a pin wrench. The flange is located on the outer side. 3. Use grease on o-ring of thru hole insert and install into fork from the outside with a combined pushing and twisting motion. Do NOT use thru axle to drive thru hole insert into the fork. 4. Use grease on threads of thru axle. Tighten using a 5mm hex wrench
• 【Note】:Perfect replacement for an original part. It is perfectly matched to the original vehicle after installation.