JASAG Smart Access Control Copier, RFID Reader Writer, 125KHz Duplicator, 13.56MHz Encrypted Card Decoder, NFC Tag Replicator, with Writable Key Fobs, Free Software

Features

• 【Working frequency】 125KHz / 13.56 MHz, support IC / ID dual frequency replication, support NFC tags. Mainly used for access control field.
• 【Obtain the software program】 When you connect this product to a computer, you can find a U disk come out, software is saved inside. If it doesn't displayed on your computer, you can also ask me for the software link.
• 【Preparations for copying cards】Run software and connect reader with your PC properly, the program will show the reader’s model number when connect properly. Left side is 13.56MHz card (IC card) area, and right side is 125KHz (ID card) area, you have to choose the right side. In the package, Our 5 white cards can copy 125KHz cards, and 5 blue fobs are used to copy 13.56MHz cards.
• 【Read and write RFID card】①Put your card on the card reader, for 13.56MHz card, Click “start decoding”, for 125KHz card, click “Read” button. ②The software will scan and display the card number, sometimes it may need to wait for decoding completely. ③After reading out the data, choose the right copy card or fob from our package, put it on the reader and click Write button to write data to new card.
• 【Efficient high-speed USB】 1.2 meters length USB transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number.