NEWTRY Automatic Rebar Tie Gun Cordless Rebar Tying Machine for ?0.3"-1.33" Battery Powered 21V with 2pcs 2000mAh Batteries 360ft Wire Coils

Features

• Adjustable Tightness & Number of Turns: The coil's tightness can be adjusted from 1 to 9 settings, accommodating steel bars with diameters ranging from 0.3 inches to 1.33 inches. If a disconnection occurs at the gun head, it indicates that the coil is too tight and can be fixed by loosening it. The number of turns for the coil can be adjusted from 1 to 3 turns.
• Fast & Efficient: This rebar tie gun can complete a knot in just 0.8 seconds and can tie 38-42 knots per minute. Using this steel tying machine is equivalent to the productivity of 4 workers, significantly boosting your work efficiency. It comes with two 2000mAh lithium batteries for easy replacement, and the batteries require approximately 2 hours to fully charge.
• Upgraded Design: This rebar tying machine features a brushless motor, offering strong power while reducing faults, minimizing heat loss, and extending the motor's lifespan. The improved transparent shell design allows you to easily check if the wire is properly installed through the wire track, simplifying the installation process.
• Automatic Knotting & Cutting: During use, position the steel bars near the central part of the wire outlet without obstructing the wire track, allowing the wire to be tied and cut smoothly. If the knotting is unsuccessful, it can be adjusted by modifying the slider on the wire track.
• Basic Parameters: Input voltage: AC100-240V; Output voltage: 21V; Tying diameter range:0.3’’-1.33’’/7-34mm; Battery: 2000mAhX2; Times a knot: 0.8S, 38-42 knots in 1 minute; Time to fully charged: 2h; Wire length: 360ft per coil; Machine weight: 3.2lb.