Ph Tester Digital,Pool Salt Tester, Digital Salinity Meter and PH Tester for Pool Salt Water and Drinking Water, 5 in 1 Salinity PH Temp EC and TDS Meter for Swimming Pool Hot Tub Spas, High Accuracy

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 𝐖𝐢𝐝𝐞 𝐔𝐬𝐚𝐠𝐞 𝐏𝐇 𝐌𝐞𝐭𝐞𝐫:Ph meter is an essential tool to improve your life quality. This digital ph tester can be applied in the following applications,drinking water quality test, swimming pools quality monitor, PH balance measurement in RO/DI system, aquarium, spa, hot tub ,wine brewing ,or hydroponics.
• 𝐓𝐡𝐫𝐞𝐞 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐃𝐞𝐬𝐢𝐠𝐧𝐬 𝐟𝐨𝐫 𝐒𝐚𝐥𝐢𝐧𝐢𝐭𝐲 𝐓𝐞𝐬𝐭 : PPM + PPT + %. For Swimming Pool Salt Test : 0-9999ppm; Seawater Test: 10-200ppt (1ppt=1000ppm, when ppm figure is over 9999ppm, the meter automatically changes to ppt ). For Food Test : 0.01-25%. So you don’t have to calculate complex salt content level numbers between different units, which help you to avoid calculating mistake and also makes result-reading easier for you.
• 𝐄𝐚𝐬𝐲 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧 𝐟𝐨𝐫 𝐒𝐚𝐥𝐢𝐧𝐢𝐭𝐲 𝐓𝐞𝐬𝐭 :When you want to use our pool salt tester, all you need to do is to turn the meter ON and click MODE button to shift to SALINITY function. This easy and convenient operation design is very considerate and offers premium experience. Wide Application Salinity Meter: Digital water salinity test meter applies for multiple uses, like salinity test for swimming pool, Koi Fish, Seawater, Aquariums & Marine Monitoring.
• 𝐑𝐞𝐥𝐢𝐚𝐛𝐥𝐞 𝐓𝐃𝐒 𝐌𝐞𝐭𝐞𝐫 𝐖𝐢𝐭𝐡 𝐀𝐜𝐜𝐮𝐫𝐚𝐭𝐞 & 𝐐𝐮𝐢𝐜𝐤 𝐌𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭 : Digital pool water tester is equipped with premium quality titanium alloy probe, which enables quick and accurate water quality test. Our water quality tester is with 0-9999ppm & 0-200ppt wide test range ensures different function of usage.
• 𝐌𝐮𝐥𝐭𝐢𝐩𝐚𝐫𝐚𝐦𝐞𝐭𝐞𝐫 𝐰𝐚𝐭𝐞𝐫 𝐓𝐞𝐬𝐭 𝐦𝐞𝐭𝐞𝐫 𝐢𝐬 𝐞𝐪𝐮𝐢𝐩𝐩𝐞𝐝 𝐰𝐢𝐭𝐡 𝟓 𝐝𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐭 𝐟𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐬 𝐟𝐨𝐫 𝐰𝐚𝐭𝐞𝐫 𝐪𝐮𝐚𝐥𝐢𝐭𝐲 𝐭𝐞𝐬𝐭 : Salinity + TDS + EC + pH + Temperature are combined perfectly in one meter. This is not only been convenient for your different water testing needs, but also saves your time and money, totally a helpful water test kit for your water quality
• 𝐓𝐢𝐩𝐬 𝐟𝐨𝐫 𝐁𝐞𝐬𝐭 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 : If the screen appears unclear, try replacing the battery. For any operation issues, restore the factory settings by pressing and holding the power button for 8 seconds. If the readings seem inaccurate, resetting to factory settings can help, as all parameters are pre-calibrated before shipping. Additionally, for precise pH measurement, use the included pH calibration powder to recalibrate after a reset.
• Packing List: 1.TDS/EC/PH/TEMP/SALT meter 2.PH buffer powders 3*PH 4.01&3*PH 6.86&3 PH 9.18 (Salinity calibration requires the purchase of a separate calibration reagent, which is not included in the kit.).
• Batteries are shipped with protective diaphragm, need to remove the diaphragm before power on.
• Calibration Note:In general,EC/TDS/SALT calibration is not required—restoring factory settings is sufficient.For high-accuracy requirements, manual calibration is recommended.To restore factory settings, press and hold the power button for 8 seconds.
• EC/TDS/SALT Calibration:This device is factory calibrated according to standards. If recalibration is needed, test solutions must be purchased separately (not included in the package).