Tondiamo 40 ft Rv Rain Gutter 3/4 Inch Plastic Drip Rail PVC Strip Roof Rain Diverter, Adhesive Backing, Flexible J Shape Rv Trim Molding for Car Van Door Motorhome(Black)

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Newly Upgraded Enlarged Size: enlarged size to height 3.45Cm/1.36in, width at the widest point 1.9cm/0.75in, rain gutter width is about 0.45 inch, enlarged size can better divert and control water runoff, one roll long About 20 feet, you will get 2 rolls with a total length of 40 feet, long enough to meet your daily needs
• Adhesive and Waterproof: the backing of drip rail is adhesive and not easy to fall off; Made of quality PVC material with smooth coating, wear resistant, corrosion resistant, can be deformed at will and has a longer service life
• No More Water: with good adhesion and water diversion, PVC rain gutter helps to keep rainwater and snowmelt out of your home or car through walls, providing you with safe and comfortable living environment
• Simple Installation: measure the required length, cut the RV door rain trim to the needed length, then clean the dry surface mix alcohol and water cleaner (in a 1: 1 ratio), finally remove the backing tape and install it on the dry surface
• Note: for best adhesion, first clean the surface with mineral spirits, then use an alcohol wipe to remove mineral spirits essential oil residue; Place the rolled J-channel in the sun for half an hour to warm up, then unroll it and keep adjusting its position until it's flat before applying; Place the J channel on and press firmly for 30 seconds to allow the adhesive to set firmly; Application in hot weather or without preparing the surface may result in poor adhesion